![]() Turn off the computer (use only as a last resort and with caution).Any changes made are reverted, and the BIOS or CMOS is set back to default settings. Access the Exit or Save & Exit tab in setup, select the Load Optimized Defaults option, select Yes, and press Enter.Press the F9 key to load default settings and press F10 to save and exit.If you have trouble exiting the BIOS or CMOS setup, you can try the following methods to fix the problem. Access the Exit or Save & Exit tab in setup and select the Exit or Save and Exit option.Press the F10 or F12 key to save changes and exit.Press the Esc key to exit without saving any changes.The most common methods include the following. There are several ways to exit the BIOS or CMOS setup depending on the computer's type. If this does not work, make sure your keyboard is working. Keep pressing the key until the computer stops booting, and you can enter setup. To do this, press and hold any key on the keyboard, and do not let go (you may get several beeps as you are doing this). Additional suggestions for accessing BIOS or CMOSįinally, if none of the above suggestions allow access to the setup, try generating a stuck key error, which gives an option to enter the BIOS or CMOS setup. Some early IBM computers require you to press and hold both mouse buttons as the computer boots to enter the BIOS setup. See the computer manufacturers list for contact information. Because these diskettes are unique to your computer manufacturer, you must obtain the diskettes from them. These diskettes may be called ICU, BBU, or SCU disks. PHOENIX F2, Ctrl Alt Esc or Ctrl Alt S 0 Boot your PC and enter CMOS setup by. BIOS or CMOS diskettesĮarly 486, 386, and 286 computers required a floppy disk to enter the BIOS setup. CMOS setup The next step is to enter CMOS setup to set the CPU and RAM. Older AMI BIOS could be restored to bootable settings by pressing and holding Insert as the computer is booting. While holding F10, two beeps should be heard to indicate the settings are restored. If your Acer computer cannot boot or you want to restore the BIOS to its original settings, press and hold the F10 as you turn on the computer. Below is a listing of key sequences to press as the computer boots to enter the BIOS setup. Unlike today's computers, older computers (before 1995) had numerous methods of entering the BIOS setup. Now that I wish to upgrade the OS to Windows10, the compatibility analyser tool reports that the CPU is incompatible and the upgrade is not possible. This also shows as Pheonix Award Bios CMOS vers 6.0PG (06-29-07). If F10 doesn't work, look at the bottom or top of the screen for the key that's used to save the settings. I have NOT updated the original BIOS - Phoenix Award version 1.0V(06-29-2007). You copy the BIOS file to a USB drive, reboot your computer, and then enter the BIOS or UEFI screen. Some manufacturers offer a BIOS-flashing option directly in their BIOS, or as a special key-press option when you boot the computer. If any changes are made, you need to save those changes, which is usually done by pressing the F10 key on the keyboard. The BIOS update's included README file should recommend the ideal option for your hardware. For help with replacing the battery, see: How to replace the CMOS battery. If you've recently added new hardware or resetting the default values did not help resolve your boot issues, you may also want to reset the configuration data.If changes you made appear to revert to default settings, or the date and time setting in the BIOS keeps falling behind, you may need to replace the CMOS battery. Once the default values are set, make sure to Save and Exit.my motherboards manufactur company doesnt exist anymore. yes I have tried that but dude, the thing is. If you post your motherboard I can help find your bios update. Award bios version f4 could be any of a thousand motherboards. Press Y for yes or arrow to the yes option. There they will have a few bios updates plus way to update your bios. When found and selected, you are asked if you're sure you want to load the defaults.Other setups may list an option that you can arrow over to using the arrow keys and pressing Enter. For example, the F5, F6, F9, F11, or F12 key, as shown in the picture, may be set up as a shortcut to load the default settings. With many CMOS setup screens, there is a function key to do this. In CMOS setup, look for an option to reset the CMOS values to the default setting or an option to load the fail-safe defaults.How to enter and exit the BIOS or CMOS setup.To reset your computer's CMOS or BIOS (basic input/output system) settings back to the default settings, follow the steps below. If you're seeing an error about a "media test failure," there may be a loose cable inside the computer or the hard drive might be bad.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |